Over a year in development and testing, this new knuckle design sets a new standard in Toyota knuckle strength and reliability. This kit totally eliminates the problem of broken steering knuckles and studs. The addition of two studs in each arm effectively prevents the steering arm from becoming loose and shearing off the studs. The knuckle housing is also thicker than stock and larger gussets have been added around the outside of the knuckle for extra strength. Precision CNC machined, each knuckle is direct bolt on, heavy duty replacement.

Six Shooter Knuckles are sold as a pair and include our set of special 6 hole shims for use between the top of the knuckle and the steering arm. Also included is a 1/2" coarse thread bolt to help remove the steering arms for knuckle service. To remove the steering arms, remove all 6 nuts, then install the bolt in the top of the arm. As the bolt is tightened, the steering arm is pulled up off the knuckle. Stock lower bearing plates and shims from your old knuckles are needed for knuckle assembly. A minimum of four additional steering arm studs are needed for installation. No questions asked, lifetime warranty on all knuckles, arms, and rods.

Knuckle and steering arms are sold separately. In order to install all six studs, both knuckles and steering arm kits are required.

Six Shooter Knuckle Kit, $249, 130006-1-K

Knuckles & Arms Sold Separately

Knuckle Kit

Additional Photos

Toyota Six Stud High Steer Crossover Steering

Our six stud high steer kit includes left and right six stud steering arms, tie rod, drag link, four rod ends and your choice of flat or curved pitman arm. To use this kit you will also need an IFS style steering box, box mount, and four additional knuckle studs & hardware. Knuckle hardware can be found on our knuckle page Fits 1979-1985 Toyota Pickup and 4Runner solid front axles.

High Steer Kit w/ 6 Stud Arms w/Standard Pitman Arm, $399, 130008-1-K

High Steer Kit w/ 6 Stud Arms w/Flat Pitman Arm, $399, 130012-1-K

Six Stud Q & A

Toyota Six Stud High Steer Arms

Trail-Gear is the originator of forged high steer arms for Toyota Pickups and 4Runners. Each arm is pressure forged from 8620 tool steel, these arms are incredibly strong. Because we make them in lots of 1,000 at a time we can offer these at a great low price! All mounting surfaces are machined including the split washer surface and the tie rod tapered holes, ensuring correct and positive contact between parts, preventing knuckle studs and tie rod ends from coming loose. Arms are angle compensated so that the rod ends ride at the factory designed 90 degree angle.  Fits 1979 - 1985 Toyota pickup and 4Runner. Also fits 1979 and later Land Cruisers with spring over conversion. No questions asked, lifetime warranty.
 

High Steer Arms, 6 stud, $199 pair, 130010-1-K

Related Products:

Note: Six Shooter Knuckles are a marlin crawler design and are manufactured exclusively by Trail-Gear Inc.