| |
|
|
Master Cylinder - 1" Bore
Makes a great
replacement for older Pickup's and 4Runners
with smaller bore size. Fits 1979-1995
Pickups and 4Runners. Master Cylinder
features 1" piston and residual valves for
both front and rear disc brakes. Can be used
with disc or drum brakes. Includes
reservoir.
 |
Master Cylinder
1" Bore, $129, 140001-1 |
|
 |
|
Front Brake Calipers
These calipers
are the larger V6 style found on 88-95
Pickups and 4Runners. Great replacement for
worn our or leaking calipers. Also makes a
great upgrade on 79-85 solid front axles
when used with vented rotors listed below.
Note wheel spacers may be needed to clear
calipers on some wheels. No core charge,
outright purchase. Includes installed
premium Semi-Metallic pads.
|
|
Brake Caliper,
Front V6, Loaded, Right, $119, 140047-1-K |
|
|
Brake Caliper,
Front V6, Loaded, Left, $119, 140046-1-K |
|
 |
|
Front Brake Pads
Premium
Semi-Metallic asbestos free front replacement brake
pads. Set of 4 pads. Applications to fit Toyota's from
1979-2004
|
|
Brake Pads,
Front, 79-88, $16 set |
|
|
Brake Pads,
Front, 89-95, $20 set |
|
|
Brake Pads,
Front, 95 1/2- 04 , $16 set |
Rear Shoes Coming Soon! |
 |
|
Vented Rotors
1986 and later
pickups and 4Runner feature larger vented rotors from
the factory. Earlier 1979-1985 trucks used solid (non
vented) rotors up front along with smaller calipers. If
your installing a solid front axle on an 86 and later
rig you will want to install a set of these vented
rotors onto the axle. With these rotors you will be able
use your existing larger IFS calipers. Simply unbolt
your existing rotors and replace them with these vented
rotors. Slight grinding of the rotors backing plate will
be needed. Then simply install the IFS calipers right on
to the solid axle using the factory bolts.
These rotors can also be
used on 85 and older trucks to increase braking
effectiveness. Fits 81-85 Solid axles with 8 hole style
rotors.
|
|
Vented Rotors, $39 each,
140042-1 |
|
 |
|
Extended
Brake Lines
These steel
braided brake lines are 26" long and are DOT
approved. Front lines use factory mounting
clips so there is no need to modify the
factory clips in any way.
Specifications:
-
Size 3/16"
-
Operating
Pressure PSI 1,750
-
Burst
Pressure PSI : 7,000
-
Bend
Radius 2.0"
-
Fits 79-95
Pickup & 4Runner
-
Fits
Suzuki Samurai's w/Toyota axles.
For Samurai's
with Toyota axles use front (Female to
Female) lines for both front and rear. Two
lines are required for front. On line is
required for 88 1/2 and later Samurai's. Two
rear lines are required for 88 and older
Samurai's.
|
|
Brake Line Kit
(2 front 1 rear), $69, 140011-1-K |
|
|
Brake Line,
Individual Front F-F, $25, 140003-1 |
|
|
Brake Line, Individual Rear F-M, $25, 140004-1 |
|
|
Brake Line Clip
& Mount (for rear line only), $5, 140048-1-K |
|
 |
|
Replacement
Pedal Cover
Are your clutch and
brake pedal covers worn out from years of driving
your Toyota? Our stock replacement covers fit brake
or clutch pedal on 1979-1995 Toyota Pickup's and
4Runners.
|
|
Pedal Cover,
$4.99 each,
181002-1 |
|
 |
|
Factory
Toyota Brake Hardware
|
|
Caliper Hard
Line, Left Side, $4.99, 140112-1 |
|
|
Caliper Hard
Line, Right Side, $4.99, 140111-1 |
|
|
Caliper Bleeder, $5.52, 140113-1 |
|
|
Bleeder Cap,
Rubber, $1.69, 140114-1 |
|
|
Caliper Bolt,
$1.73, 140115-1 |
|
|
Caliper Bolt
Washer, $0.63, 14116-1 |
|
 |
| |
|
|
|
