Trail-Gear Shopping Cart
View your shopping cart.

Toyota, Suzuki Samurai, and Jeep Off Road Parts

Corner Relief Gusset

Weld-On Gussets and Light Bar Tabs

Samurai Front Axle Service Kit

Samurai Knuckle Sandwich Kit

Mechanical to Electrical Speedometer Adapter

Samurai Clutches

Samurai Spindle Nut Socket

Rock Defense™ FJ Cruiser Front Bumper

FJ Cruiser Front Bumper

FJ Cruiser Front Bumper

Rock Defense™ FJ Cruiser Low Profile Front Bumper

Trail-Gear is now offering their signature armor for FJ Cruisers! The Rock Defense™ FJ Cruiser Front Bumper will fit FJ’s from 2006 to 2012. All Trail-Gear bumpers are constructed with 1.75" x .120" wall, DOM material that will give your FJ all the protection it needs when you are playing on the rocks. This bumper is a true "bolt on" product, no welding required*. It comes raw and ready to customize with whatever surface treatment you choose.

Mounting holes on the winch plate are drilled for most 5000-9500 model low-profile winches and smaller sized 9.0R winches. Bumper also features a shackle receiver that will make a great anchor point for winch or strap recoveries.

Flat Rate Shipping

Rock Defense™ FJ Cruiser Front Bumper, 2006-2012, 300137-KIT

$481.95


Rock Defense™ FJ Cruiser Low Profile Front Bumper

Rock Defense™ FJ Cruiser Low Profile Front Bumper

Rock Defense™ FJ Cruiser Low Profile Front Bumper

Rock Defense™ FJ Cruiser Low Profile Front Bumper

The FJ Cruiser Low Profile Front Bumper features the same solid construction as the FJ Cruiser Front Bumper only without the stinger for a sleeker look. It is made from 1.75" x .120" wall, DOM material that will give your FJ all the protection it needs when you are playing on the rocks. No welding required* for installation, simply bolt-on and go. This bumper comes raw and ready for customization with the surface treatment of your choice.

Mounting holes on the winch plate are drilled for most 5000-9500 model low-profile winches and smaller sized 9.0R winches. For larger winches some minor trimming of the grill may be required. Bumper also features a shackle receiver that will make a great anchor point for winch or strap recoveries.

Flat Rate Shipping

Rock Defense™ Low Profile Front Bumper, 2006-2012, 300182-KIT

$418.95


Rock Defense™ FJ Cruiser Rear Bumper

Rock Defense™ FJ Cruiser Rear Bumper

FJ Cruiser Front Bumper

Rock Defense™ FJ Cruiser Low Profile Front Bumper

Trail-Gear is now offering their signature armor for FJ Cruisers! The Rock Defense™ FJ Cruiser Rear Bumper will fit FJ’s from 2006 to 2012. All Trail-Gear bumpers are constructed with 1.75" x .120" wall, DOM material that will give your FJ all the protection it needs when you are playing on the rocks. This bumper is a true "bolt on" product, no cutting or welding required*. It comes raw and ready to customize with whatever surface treatment you choose.

Note:This bumper has been tested, and meets the tow rating requirements for SAE J684 and V-5 Class 3 (5,000 lbs.) GVWR.

Flat Rate Shipping

Rock Defense™ FJ Cruiser Rear Bumper, 2006-2012, 300135-KIT

$418.95


FJ Cruiser Welded Rock Sliders

FJ Cruiser Rock Sliders

 

These heavy duty Rock Sliders are fully welded and ready to bolt on to your new Cruiser using the factory mounting holes. Sliders are made from 1 3/4" X .120" wall 1035 DOM tubing. Sliders are 58" in length. Includes 4 legs on each slider with super beefy gussets on each leg. Fits all 2007-2014 FJ Cruisers. Mounting hardware is included.

Please note that small rub marks and scratches can result during shipping and handling.

Note: Sliders are shipped raw and slightly oiled to prevent rusting.

Rock Sliders, Raw, FJ Cruiser, 120012-1-KIT (PAIR)

$313.95


FJ Cruiser Rear Bumper Support Tubes

FJ Cruiser Rear Bumper Support Tubes

 

 

For more aggressive wheeling you may want to include the optional FJ Cruiser Rear Bumper Support Tubes. These additional supports give you a little extra protection when attacking the trails. Installation requires trimming the exhaust pipe and welding the supports in place.

FJ Cruiser Rear Bumper Support Tubes, 300178-KIT

$82.95


FJ Cruiser Front Bumper Skid Plate

FJ Cruiser Front Bumper Skid Plate

FJ Cruiser Front Bumper Skid Plate

Hardcore wheelers may want the additional protection provided by the Optional FJ Cruiser Front Bumper Skid Plate. This 3/16” steel plate mounts to the front underbelly of the bumper to offer additional protection when assaulting the obstacles on the trails. The FJ Cruiser Front Bumper Skid Plate works with both the original and the low profile FJ Cruiser front bumpers. The kit includes all necessary mounting hardware. Just bolt it on and hit the trail!

Note: This FJ Cruiser Front Bumper Skid Plate was engineered to allow for a snug fit with the addition of a Line-X or Rhino lining treatment. Washer spacers have been included in this kit to allow for proper fitment using other surface treatments

FJ Cruiser Front Bumper Skid Plate, 300179-KIT

$103.95


FJ Cruiser Weld-On Differential Armor

Protect your differential gears from unnecessary damage. Trail-Gear now offers weld on differential Armor for 2007-2013 FJ Cruiser. Precision Laser Cut from 1/4” A36 Steel, then CNC formed to provide the best protection. Part is shipped raw, and requires painting after welding.

FJ Cruiser Weld-On Differential Armor, 300654-KIT

$40.95


Tacoma/FJ Front Differential Drop Kit

Tacoma/FJ Front Differential Drop Kit

Lifting a newer Tacoma, FJ Cruiser, or 4Runner increases the angles on the CV joints and boots, which accelerates wear. These solid aircraft-grade 6061-T6 aluminum spacers and zinc-plated Grade 8 hardware move the front differential down an inch and puts the CV angels back to where they should be. We even provide aluminum spacers and longer zinc-plated Class 8.8 bolts to move the stock skidplate down.

Fits the following applications:

  • Toyota Tacoma 2005-2013 (All Engines)
  • Toyota FJ Cruiser 2007-2013 (All Engines)
  • Toyota 4Runner 2003-2009 (All Engines)

***MADE IN THE USA***

Tacoma/FJ Front Differential Drop Kit, 300705-1-KIT

$26.25


FJ Cruiser Transfer Case Skid Plate

Serious off-road protection for your transfer case and exhaust. Heavy duty design takes impacts and directs the force up to the frame, away from expensive drive train components. Skid plate is made from 3/16" plate steel and attaches to the frame via 1.5" .120 tubing. Bolt on installation utilizing existing threaded mounting points on the frame. Protects both the transfer case and the exhaust crossover tube. Item is shipped raw and lightly oiled to prevent rust. We recommend that you paint or powder coat before installing.

Kit includes mounting hardware. Fits 2007-2011 4wd FJ Cruiser.

Transfer Case Skid Plate, FJ Cruiser, 120065-1-KIT

$208.95