| |
 |
|
|
IFS Steering Boxes
High quality
remanufactured IFS boxes for your crossover steering. We
carry both newer and older styles. For crossover
steering on 79-85 trucks we recommend the early style
box but you can also use the late style if you wish.
Early style (left in photo) fits 86-88 Pickup and 86-89
4Runners. Late style box (right in photo) fits 89-95
Pickup and 90-95 4Runners. All boxes are completely
rebuilt with new seals and bearings. Each unit is tested
before shipping.
 |
IFS
Steering Box 86-88, $299, 130010-1 |
|
|
IFS
Steering Box 89-95, $399, 130006-1 |
|
 Install Instructions |
|
IFS Steering Boxes - Tapped
Looking for
a steering box for your hydro assist steering system? We
now have in stock Toyota IFS steering boxes that are
drilled and tapped for hydro assist steering. Two # 6
JIC fittings are installed. After tapping, each box is
thoroughly flushed and fully rebuilt. 1986-1988 Style
box.
If you're the type
that wants to tap your own box, we have the
fitting you need to do it. The fitting has a
male 1/4" pipe fitting on one end and male
#6 JIC fitting on the other end. Two fittings
are required for each steering box
conversion.
|
|
IFS Box, Rebuilt
& Tapped, $399, 130019-1 |
|
|
Fitting, 1/4
pipe to #6 JIC, $3 each, 130263-1 |
|
 |
|
Steering
Box Plug
1/4"
NPT plug fitting. Used to plug steering box
ram outlets. A pair of these plugs can be
used to disconnect a hydro ram from the
steering box.
|
|
1/4 inch NPT
plug, $2 each, 130033-1 |
|
 |
|
FJ60/62 Steering Boxes
Rebuilt FJ60/62 steering boxes. These
steering boxes feature reverse cut internal
gears. The pitman arm swings in front of the
steering box instead of behind like the IFS
style shown above. If you're moving your front
axle all the way forward with links and
don't want a steering box and frame hanging
way out in front then consider using this
box as it can be mounted behind the drag
link instead of in front of it. This
steering box has four mounting holes and
will require custom mounting if you are
using it on a Pickup/4Runner or Samurai.
Sector shaft and input shafts have the same splines as IFS boxes. All boxes are completely
rebuilt with new seals and bearings. No core return
needed. Each unit is tested
before shipping.
|
|
FJ60/62
Steering Box, $449, 130034-1 |
|
 |
|
IFS Steering Box Mount
If you're
installing crossover steering on your 79-85 4wd Toyota
you're going to need to mount an IFS steering box. This
frame mount kit includes both inner and outer frame
reinforcing plates, grade 8 bolts, DOM tubing, and Crimp
nuts. Inner plate is 1/4, outer plate is 3/16". Angled
leading and trailing edges prevent frame cracking. Heavy
duty design. No questions asked, lifetime warranty.
|
|
IFS
Steering Box Mount, $39,
130004-1-K |
|
 |
|
Sector
Shaft Nut & Washer
Replacement nut and washer for bolting on
pitman arm to steering box. Fits 4wd IFS
steering box from 1986-1995 Pickup and
4Runner.
|
|
Nut, Sector
Shaft, $3 each, 130031-1 |
|
|
Washer, Sector
Shaft, $2 each, 130032-1 |
|
 |
|
|
|
|
|
