Trail-Gear Weld-On Light Tabs are CNC formed from 1/8" thick 1010 steel, coped for 1 1/2" or 1 3/4" O.D. tubing, and have a 1/2" sized bolt hole. Weld-on light tabs are shipped unpainted and are sold in pairs.

These tabs also make great generic weld-on tabs for things like seats, seatbelts, or just about anything else you want to mount onto a piece of tubing.

Weld-On Light Bar Tabs, 120210-K, $6.95

Bolt on license plate holder, great for attaching your license plate to after market front or rear bumpers. With the included white LED light the license plate is easy to see and most importantly, keeps you legal. Clamps come for either 1 1/2" or 1 3/4" O.D. tubing. All mounting hardware is included, ships raw, unpainted.

Available Options:

• License Plate Holder Kit, 1 1/2" O.D., 180209-K, $28
• License Plate Holder Kit, 1 3/4" O.D., 180210-K, $28

Even the strongest frames need reinforcing when rock crawling and rock racing are your hobbies, that is why Trail Gear is now offering our Rock Defense Front Frame Support Kits for 79-85 Trucks, and 86-95 ½ trucks and 4runners. These Rock Defense™ Front Frame Reinforcement Kits are precision laser cut from 3/16” thick steel and can easily be welded onto the outside of each side of the frame to provide extra strength to a frame that has been torched, welded, and hammered on over and over. Each kit includes two frame plates, one for each side. Kit is shipped unpainted and lightly oiled.

Available Options:

• Frame Reinforcement Kit, 79-85, 112034-1-K, $83
• Frame Reinforcement Kit, 86-95, 112036-1-K, $83

TG-LEDs are waterproof, sealed in a durable silicon strip, flexible, and very dependable. Unlike halogen rock lights that draw high amps, TG-LEDs only use milliamps, so the draw on your battery and alternator is minimal. You will be amazed at how much light the TG-LEDs actually put out. They look small, but perform big. This is the perfect light for your crawler or buggy on those night wheeling trips or just when you need some light under your rig for a trail repair.

TG-LEDs come in 5 different lengths, ranging from 9.5” to 47.5”. You get 5 different colors to choose from, and they are easy to install. The average life time of a TG-LED is 50,000 hours. Brightness rating per LED is as follows: red = 300mcd, green = 3,000mcd, blue = 800mcd, white = 1,500 mcd, yellow = 600mcd.

Tired of beating up your stock doors on the rocks or hanging your head out the window so you can see where you're going? Trail-Gear has the answer. We are proud to introduce our new Rock Defense™ Tube Doors for 2nd gen pickups and 4Runners and 3rd gen pickups. Our Rock Defense™ Tube Doors are the strongest on the market and made from 1 3/4” x .120” wall 1035 DOM tubing to ensure that they will protect you and your truck from the rocks.

Rock Defense™ Tube Doors are sold as a complete set and include our newly designed pull action slam latches, which allow you to simply get in or out without trying to insert a pin to make the door latch. You just slam it like you would the stock door and it shuts securely. In conjunction with our slam latches we also included an adjustable rubber door stop that allows you to adjust how tightly your door shuts so there is never any rattling and the door never pops open.

Doors are shipped raw and will need to be painted before installation, all necessary hardware is included.

Available Options:

• Rock Defense™ Tube Doors, 120132-1-K, 84-88 Pickups/84-89 4Runners, $278
• Rock Defense™ Tube Doors, 120136-1-K, 89-95 Pickup Only, $278

Tired of beating up your stock doors on the rocks or hanging your head out the window so you can see where you're going? Trail-Gear has the answer. We are proud to introduce our new Rock Defense™ Tube Doors for 95.5 - 04 single cab Tacomas. Our Rock Defense™ Tacoma Tube Doors are the strongest on the market and made from 1 3/4" x .120" wall, 1035 DOM tubing to ensure that they will protect you and your truck from the rocks.

Rock Defense™ Tacoma Tube Doors are sold as a complete set and include our newly designed slam action latches, which allow you to simply get in or out without trying to insert a pin to make the door latch. You just slam it like you would the stock door and it shuts securely. In conjunction with our slam latches we also included an adjustable rubber door stop that allows you to adjust how tightly your door shuts so there is never any rattling and the door never pops open.

Doors are shipped raw and will need to be painted before installation. All necessary hardware is included.

Rock Defense™ Tube Doors, 95.5-04 Single Cab Tacoma, 120239-1-K, $278

Weld-on tube ends for 1-1/2" O.D. x .120" wall and 1-3/4" O.D. x .120" wall tubing are great for bumpers, cages, and other custom tube work that might need an end cap for added strength or visual appeal. They are stamped from 3/16" 1020 steel.

These tube ends are sold in 10 packs.

Available Options:

• Tube End Kit, 1-1/2"O.D. x .120", 180188-K, $5.24
• Tube End Kit, 1-3/4"O.D. x .120", 180189-K, $5.24

Our weld on flat tabs are made from 1020 hot rolled steel, are 1/4" thick and are designed for a 9/16" bolt, they are 2" wide and 2 5/8" tall. The center of the hole is 1 5/8" from the bottom of the tab.

Sold in 10 packs and shipped lightly oiled. These tabs are great for mounting almost anything. When building a buggy or a truggy these are a must have.

Weld On Flat Tab, 10 Pack, 180190-K, $37

Our 3/16" thick weld on flat tabs have a 1/4" hole and are made from 1020 hot rolled steel.

These tabs are offered in 1 3/4" and 2 1/2" lengths, shipped bare, and are sold in 10 packs.

Available Options:

• 3/16" Thick Weld On Flat Tab, 1 3/4"", 10 Pack, 180202-K, $14
• 3/16" Thick Weld On Flat Tab, 2 1/2", 10 Pack, 180201-K, $16

We are happy to introduce our new GM Style Alternator Bracket Kit. This bracket kit will allow you to bolt a GM style 1 wire alternator to your 20R, 22R or 22RE motor with no major modifications, and it works with your stock alternator belt. This kit will allow you to say goodbye to the small underpowered OEM Toyota alternator and upgrade to a GM style unit that will supply ample power for your rock lights, stereo, GPS and all the other gadgets that are required for modern day rock crawling and racing.

Works with many GM style alternators, but listed below are part numbers for the most common GM style alternators.

• AIM/NAE (Napa) 67294
• BBB Industries 72941w
• Beck Arnley 1867294
• Lester 7294se
• Perfection 020854se100
• Worldwide 53166

The listed part number for the NAE 67294 is 7294SE and is the most common part number used. Most auto parts stores should also be able to cross reference this number.

GM to Toyota Alternator Bracket, 120120-1-K, $43

The Trail-Gear hi-lift jack rubber isolator is is the perfect fix for that hi-lift or hi-lift style jack you have rattling around in the back or your truck. The isolator slides onto both the jack and the jack handle keeping them from vibrating together and holding both components firmly in place.

Our Isolator is 100% rubber, black, and very durable. It not only keeps your jack from rattling, but it also keeps your jack handle from bouncing around and doing damage to you or your rig. Every jack should come with one of these, but since they don't, Trail-Gear has you covered.

Hi-Lift Jack Rubber Isolator, 180158-K, $12

Great for fixing tires quickly on the trail. Kit includes heavy duty T-handle insert tool, heavy duty rasp, 25 8" long plug strips, lubrication, 2 replacement tool ends and handy storage case. You have seen this same kit priced elsewhere for $39, now you can get the same kit for just $20!

Tire Plug Kit, $20, 180005-K