Trail-Gear has raised the bar yet again in the Toyota Off Road Industry with the newest addition to our product line, a stainless steel header. Our Rock Ripper™ Toy Header is the best on the market today, it features 100% polished stainless steel 1/16" thick tubes going into a 1/2" thick header to head mounting flange. We tig welded everything and then polished it to give it a clean look.

The Rock Ripper™ Toy Header is not only made out of the thickest material on the market, but since it is stainless it will not rust or corrode and does not need to be ceramic coated or wrapped. The Rock Ripper™ Toy Header is plug and play, and all gaskets, connectors, and pipes are included along with full color instructions.

Note: This header is not smog legal, and should be used for off road use only.

Available options:

• Rock Ripper™ Toy Header, 79-84, 186053-1-K, $440
• Rock Ripper™ Toy Header, 85-95, 186063-1-K, $440

 

Replacement filter for your cold air intake system.

Rock Ripper™ Air Filter 5", 186083-K is interchangeable with K&N filter P/N RU-4600

Rock Ripper™ Air Filter 8.8", 186084-K is interchangeable with K&N filter P/N RU-3050

Available options:

• Rock Ripper™ Air Filter 5", 186083-K, $30
• Rock Ripper™ Air Filter 8.8", 186084-K, $36

Trail-Gear has come up with this very clean way to totally eliminate your stock air injection tube.  This kit contains 2 plates that will allow you to install our headers without the air injection tube. The small plate is an O² sensor blockoff plate for guys running propane. No gaskets are supplied with this kit. The kit uses the gaskets that are already supplied in the header kit.

Air Injection Tube Blockoff Plate Kit, 186055-1-K, $22

The TG Battery Box will keep your battery where you want it, even on the toughest rocks and trails. We have all seen the results of batteries not held in place securely, or held in place by bungie cords: fire and sparks. The TG Battery Box can either be welded or bolted into place. It is made out of 1/8” thick steel and is shipped unpainted. Once the TG Battery Box has been mounted you simply remove the three bolts and the top lifts off and allows you to remove or install the battery in minutes. The TG Battery Box can either be mounted where your OEM battery was, or, due to its "flat back" design, it can be mounted behind your seat or cab. The TG Battery Box works with Red Top Optima Battery, model #3478DT.

TG Battery Box, 180014-K, $56

Trail-Gear Silicone Radiator Hose Kits will provide your engine with a one-of-a-kind advantage in performance and style. These kits are dual layered, combining high-grade silicone and heat-resistant embedded fibers which will provide exceptional and efficient heat reduction and increased pressure tolerance, giving you peace of mind and years of satisfaction.

Trail-Gear radiator hose kits are a direct OEM fit. All of our silicone hoses are 3 ply polyester reinforced construction with a temperature range from -20º to 350º. The advantage that a silicone radiator hose has over a standard rubber radiator hose is that the silicone hose can handle much greater temperatures and they are resistant to ozone exposure, oil, and other engine fluids and electrochemical degradation, which means that silicone radiator hoses last about five times longer than a standard rubber radiator hose.

Trail-Gear Silicone Radiator Hoses are high gloss, black in color, and are shipped with stainless steel hose clamps. This is one upgrade that you cannot afford to miss.

Note: Some trimming may be required from either end of each hose for proper fitment. May not work with 2" or larger body lifts.

These hoses meet and exceed SAE J20 standards.

Available options:

• Silicone Radiator Hose Kit, 22R, 180084-1-K, $83
• Silicone Radiator Hose Kit, 22RE, 180085-1-K, $83
• Silicone Radiator Hose Kit, 3.0L, 180062-1-K, $83
• Silicone Radiator Hose Kit, 3.4L, 180063-1-K, $83
• Silicone Radiator Hose Kit, 2.7L Manual, 180066-1-K, $83