| |
 |
|

|
|
Reservoir
Filter
Kit
When you have
invested thousands of dollars into your full
hydraulic steering system, you will want to
protect it with the best reservoir and
filter that you can get. That is why
Trail-Gear has developed our new Rock
Assault™ Reservoir. It is not only heavy
duty, but also compact and user friendly. It
features a full size hydraulic oil filter
that will keep all the bad stuff out of your
power steering pump and hydraulic ram. Our
Rock Assault™ Reservoir also comes with an
internal baffle, features two internal
magnets, and is completely sealed with top
quality o-rings to prevent any fluid
leakage. This reservoir also has a quick
drain plug that is located at the bottom of
the unit that will allow you to easily drain
your system in minutes. Our unique fluid
flow design is rated up to 15GPM and allows
you to use your steering system while the
truck is on its side or at other unusual
angles that it might incur during rock
crawling or desert racing.

Note:
Do not fill more than 1/2" above the
internal baffle. |
Features:
-
Compact
-
Quick drain plug
-
Internal baffle
-
#10 JIC fitting compatible
-
Heavy duty
-
Easy change filter
-
Surface area acts as a heat sink
-
Port location offers optimum
fluid flow
-
Also reduces aeration
-
O-ring sealed system
|
 |
Reservoir Filter
Kit, $199, 130565-1-K |
|


 |
|
Reservoir Filter Bracket
Our
Rock Assault™ Reservoir Filter Bracket
bolts right to the back of our Rock
Assault™ Reservoir Filter Kit (into the
pre-tapped holes) and allows you to
either weld the other side of the
bracket to your cage (coped for 1 1/2”
tubing) or simply butt weld it to a
piece of flat stock. This kit makes
mounting our Rock Assault™ Reservoir
Filter Kit easy and efficient. The Rock
Assault™ Reservoir Filter Kit Bracket is
made from 3/16” steel plate that is CNC
laser cut and then CNC precision bent.
Note: Mounting bolts are included
with the Rock Assault™ Reservoir Kit.
 |
Reservoir Filter
Bracket, $25, 130308 |
|

 |
|
Reservoir Bracket
Our Rock Assault™ Reservoir Bracket
bolts right to the back of our Rock
Assault™ Reservoir and allows you to
either weld the other side of the
bracket to your cage (coped for 1 1/2”
tubing) or simply butt weld it to a
piece of flat stock. This kit makes
mounting our Rock Assault™ Reservoir
easy and efficient. The Rock Assault™
Reservoir Bracket is made from 1/8”
steel plate that is CNC laser cut and
then CNC precision bent.
Kit
Includes:
-
Bracket
-
3/8"-16x3/4" bolts (2)
-
Top
lock nuts (2)
-
3/8" washers (2)
 |
Reservoir
Bracket, $25, 130309-K |
|

 |
|
|
Reservoir & Bracket
When installing
a high flow pump such as the one listed
above, it is important to use a larger
reservoir to provide enough fluid when the
system needs it. The sock reservoir is fine
for the stock pump but is not adequate for
the TC style aftermarket pumps. Side input
of reservoir is a #6 JIC fitting and
the bottom outlet to pump is a #10 JIC
fitting. Reservoir includes cap.
Reservoir
bracket makes it easy to bolt in the
reservoir on most 4cyl 4X4 Toyota
applications from 1979 - 1995. Includes
mounting hardware. Unpainted
finish.
 |
Reservoir, $79, 130512-1 |
 |
Reservoir
Bracket w/hardware, $39, 130513-1-K |
|
 |
|
Steering
Fluid Cooler
If
your running a high volume/pressure pump
your system is generating much more heat
then the stock system. Fluid overheating can
cause damage to steering pump and steering
box. Installing a oil cooler in front of the
radiator is the best way to prevent this
over heating. Our cooler features a fin area
of 9" X 8" and does a great job of keeping
the steering fluid temps under control in
all conditions.
 |
Oil Cooler, $79, 130516-1 |
|
 |
| |
|
|
|