| |
|
|
High
Steer Crossover Steering Kit
Are you putting
Toyota axles under your Samurai? We
recommend high steer crossover steering with
a Toyota IFS steering box on the outside of
the frame rail. Our high steer
kit features unbeatable quality at a super
low price. Kit features super beefy, solid
forged steering arms, heavy duty pitman arm,
heavy duty .250 wall steering rods, and
greasable ends. Precision fit for easy
assembly. We offer both flat and drop pitman
arms depending on the angle you choose to
mount your steering box. Installation
requires welding to create a mounting point
for the steering box and modifying the
steering shaft.
 |
High Steer
Crossover Steering Kit,
$299, 130001-1-K |
|
|
High Steer
Crossover Steering Kit w/flat pitman arm,
$299, 130005-1-K |
|
 |
|
High Steer
Arms
Trail-Gear is the
originator of forged high steer arms for Toyota Pickups
and 4Runners. Each arm is
pressure Forged from 8620 tool steel, these arms are
incredibly strong. Because we make them in lots of 1,000
at a time we can offer these at a great low price! All
mounting surfaces are machined including the split
washer surface and the tie rod tapered holes, ensuring
correct and positive contact between parts, preventing
knuckle studs and tie rod ends from coming loose. Arms
are angle compensated so that the rod ends ride at the
factory designed 90 degree angle. Fits 1979 - 1985
Toyota pickup and 4Runner. Also fits 1979 and later Land
Cruisers with spring over conversion.
|
|
High Steer Arms,
$129 pair, 130002-1-K |
|
 |
|
Standard Pitman Arm
Solid one piece
design. Features FJ80 tapered hole. One piece, forged
design. Extra strong, wide design. Ideal for use with
crossover steering. Same drop as factory pitman arm.
|
|
Standard Pitman Arm, $69
each, 130005-1 |
|
 |
|
Flat Pitman Arm
Solid one piece
design. Features FJ80 tapered hole. One
piece, forged design. Extra strong, wide
design. Ideal for use with crossover
steering. Flat arm, no drop.
|
|
Flat Pitman Arm, $69
each, 130020-1-K |
|
 |
|
|
IFS Steering Boxes
High quality
remanufactured IFS boxes for your crossover steering. We
carry both newer and older styles. For crossover
steering on 79-85 trucks we recommend the early style
box but you can also use the late style if you wish.
Early style (left in photo) fits 86-88 Pickup and 86-89
4Runners. Late style box (right in photo) fits 89-95
Pickup and 90-95 4Runners. All boxes are completely
rebuilt with new seals and bearings. Each unit is tested
before shipping.
|
|
IFS
Steering Box 86-88, $299, 130010-1 |
|
|
IFS
Steering Box 89-95, $399, 130006-1 |
Looking for
a steering box for your hydro assist steering system? We
now have in stock Toyota IFS steering boxes that are
drilled and tapped for hydro assist steering. Two # 6
JIC fittings are installed. After tapping, each box is
thoroughly flushed and fully rebuilt. 1986-1988 Style
box.
If your the type
that wants to tap your own box, we have the
fitting you need to do it. The fitting has a
male 1/4" pipe fitting on one end and male
#6 JIC fitting on the other end. Two fitting
are required for each steering box
conversion.
|
|
IFS Box, Rebuilt
& Tapped, $399 |
|
|
Fitting, 1/4
pipe to #6 JIC, $3 each, 130263-1 |
|
 Install Instructions
 |
|
FJ60/62 Steering Boxes
If moving your Toyota axle to the front of
your Samurai with a linked suspension system
consider using on of our rebuilt FJ60/62 steering boxes. These
steering boxes feature reverse cut internal
gears. The pitman arm swings in front of the
steering box instead of behind like the IFS
style shown above. This
steering box has four mounting holes.
Sector shaft and input shafts have the same splines as IFS boxes. All boxes are completely
rebuilt with new seals and bearings. No core return
needed. Each unit is tested
before shipping.
|
|
FJ60/62
Steering Box, $449 |
|
 |
|
Tie Rod & Drag Link
Our heavy duty
tie rods and drag links. Made from .250" wall DOM 1.25"
tubing. Precision tapped. Left side thread mark. Each
rod is test fitted to ensure rod ends thread in with
correct fit. Powder coat black finish. Fits 79-95
Pickup/4Runner with crossover steering.
|
|
Tie Rod, $59
each, 130008-1 |
|
|
Drag Link, $59
each, 130007-1 |
|
 |
|
FJ-80 Tie Rod
End
Heavy duty FJ-80
tie rod ends are ideal for Toyota crossover steering
applications. Zerk fitting in the bottom allows for easy
greasing. Includes cotter pin and jam nut.
|
|
Rod End FJ-80
Right Thread, $20
each, 130004-1 |
|
|
Rod End FJ-80
Left Thread, $20
each, 130003-1 |
|
 |
|
|
|
|
