Our shackle kits feature threaded zerk fittings. Factory size 18mm bolts with crimp nuts. Zink plated plates. Polly bushings included. Lengths listed below are measures from center of hole to center of hole. Stock shackles are 3.5" between holes.

	Shackles Front Offset 5", $75, 110007-1-K
	Shackles Front Offset  5.5", $75, 110008-1-K
	Shackles Front Offset  6", $75, 110009-1-K
	Shackles Rear Narrow  5", $65, 110017-1-K
	Shackles Rear Narrow 5.5", $65, 110018-1-K
	Shackles Rear Narrow 6", $65, 110019-1-K
	Shackles Rear Wide  5", $75, 110020-1-K
	Shackles Rear Wide  5.5", $75, 110021-1-K
	Shackles Rear Wide  6", $75, 110022-1-K

Need parts to build or change your own shackles? We have all the pieces you need right here....
 

	Bolt Greasable M18 X 120mm, $7, 110017-1
	Bolt Greasable M18 X 130mm, $7, 110018-1
	Bolt Greasable M18 X 150mm, $7, 110019-1
	Nut Stover M18, $2, 110020-1
	Shackle Plates 5", $6, 110014-1
	Shackle Plate 5.5", $6, 110015-1
	Shackle Plate 6", $6, 110016-1
	Bushing, Rear, Leaf Spring, $2, 110022-1
	Bushing, Front, Long, Frame, $2, 110055-1
	Bushing, Front, Short, Leaf Spring , $2, 110021-1
	Spacer Front Shackle .75", $5, 110037-1
	Spacer Rear Shackle .375", $5, 110038-1

Greasable bolts feature threaded
zerk fittings that won't fall out when
your greasing up.

Note:
Extra strong locking nuts should
be lightly greased before assembly.

Creeper Joints are also available in a shackle mount for use with leaf springs. Using a Creeper Joint on the shackle end of a leaf spring reduces spring binding and increases suspension flex. Creeper Joint shackle mounts are sold in pairs and do not include the shackles, bolts or spring bushings. Three different flex ball sizes; 9/16" 5/8" & 18mm, allow you to choose the right size to match your application. Toyota Pickup & 4Runner use 18mm size.

	Creeper Joint Shackle Mount (pair), 18mm, $79, 110766-K
	Creeper Joint Shackle Mount (pair), 5/8", $79, 110768-K
	Creeper Joint Shackle Mount (pair), 9/16", $79, 110767-K