These shock mounts are designed to weld directly on to the axle housing. Can be used for front or rear axle applications. Made from 3/16" plate steel. Mounts have curved bottoms that can be mounted horizontally or vertically on axle. Mount is 2.5" tall with 1/2" shock mount holes.

Lower Shock Mounts, $17 pair, 110046-1-K

Most link kits do not come with upper shock mounts because the exo-cage or tube work varies from truck to truck so much it is hard to determine where shock placement will occur. At Trail-Gear, we understand this issue all too well, so we have developed an Air Shock Hoop Mounting Kit that can be used on almost any truck or buggy to properly mount air shocks.

Our kit includes two large hoops that can be coped and welded onto a frame or an exo-cage and one 3' section of tubing that can be cut to size and welded between the two hoops. Once you have done this all that is left is to weld the shock mounts onto the tube in the desired location and you are done. All tubes in this kit are 1035 DOM. Parts are shipped unpainted.

This kit works great with our front and rear link kits.

Air Shock Hoop Mounting Kit, 110187-1-K, $110

When installing leaf springs it's important to have bumpstops to limit how far the leaf springs compress. These easy to weld on extensions make installing bumpstops quick and easy. Extensions weld directly to the frame. Bumpstops are welded to the top of the U-bolt flip plates. Recommended for use with 86-95 Pickup's & 4Runners.

Bumpstop Extensions, $21 pair, 140018-1-K