| |
 |
|
|
|
Fully
Loaded Six Shooter Knuckle Kit
After years of development and testing,
these knuckles and steering arms have
set a new standard in Toyota knuckle
strength and reliability. The Fully
Loaded Six Shooter Kit totally
eliminates the problem of broken
steering knuckles and studs. The
addition of two studs in each arm
effectively prevents the steering arm
from becoming loose or shearing off the
studs under extreme loads. The knuckle
housing was designed with thicker than
stock material and larger gussets have
been added around the outside of the
knuckle for extra strength. Precision
CNC machined, each set of knuckles and
steering arms are inspected and tested
for the highest quality of products that
Trail-Gear can deliver.
Included in The Fully Loaded Six Shooter
Kit is a special 6 hole shim pack for
use between the top of the knuckle and
the steering arm. Also included is a
1/2" coarse thread bolt to help remove
the steering arms for knuckle service.
To remove the steering arms, remove all
6 nuts, then install the bolt in the top
of the arm. As the bolt is tightened,
the steering arm is pulled up off the
knuckle. Stock lower bearing plates and
shims from your old knuckles are needed
for knuckle assembly. A minimum of four
additional steering arm studs are needed
for installation. We think the Fully
Loaded Six Shooter Kit is so bullet
proof that we have given it our world
famous no questions asked lifetime
warranty.
Regular Price: $299, On Sale:
until December 31, 2009:
$249
 |
Fully Loaded Six Shooter
Knuckle Kit, On Sale: $249, 130052-1-K |
|
Knuckle
Studs Sold Separately
Kit
Includes:
-
Knuckles (2)
-
Steering Arms (2)
-
Shims
|
|
|
|
Six
Shooter Knuckles™
Over a year in
development and testing, this new knuckle
design sets a new standard in Toyota knuckle
strength and reliability. This kit totally
eliminates the problem of broken steering
knuckles and studs. The addition of two
studs in each arm effectively prevents the
steering arm from becoming loose and
shearing off the studs. The knuckle housing
is also thicker than stock and larger
gussets have been added around the outside
of the knuckle for extra strength. Precision
CNC machined, each knuckle is direct bolt
on, heavy duty replacement.
Six Shooter Knuckles are sold as a pair and
include our set of special 6 hole shims for
use between the top of the knuckle and the
steering arm. Also included is a 1/2" coarse
thread bolt to help remove the steering arms
for knuckle service. To remove the steering
arms, remove all 6 nuts, then install the
bolt in the top of the arm. As the bolt is
tightened, the steering arm is pulled up off
the knuckle. Stock lower bearing plates and
shims from your old knuckles are needed for
knuckle assembly. A minimum of four
additional steering arm studs are needed for
installation. No questions asked, lifetime
warranty on all knuckles, arms, and rods.
Knuckle and steering arms are sold
separately. In order to install all six
studs, both knuckles and steering arm kits
are required.
|
|
Six Shooter
Knuckle Kit, $249, 130006-1-K |
|
Knuckles & Arms Sold
Separately
Knuckle Kit
 Additional
Photos |
|
|
|
Toyota
Six Stud High Steer Crossover Steering Our six stud
high steer kit includes left and right six
stud steering arms, tie rod, drag link, four
rod ends and your choice of flat or curved
pitman arm. To use this kit you will also
need an IFS style steering box, box mount,
and four additional
knuckle studs & hardware. Knuckle hardware
can be found on our
knuckle page Fits
1979-1985 Toyota Pickup and 4Runner solid
front axles.
|
|
High Steer Kit
w/ 6 Stud Arms w/Standard Pitman Arm, $399, 130008-1-K |
|
|
High Steer Kit
w/ 6 Stud Arms w/Flat Pitman Arm, $399, 130012-1-K |
|
|
Six Stud Q & A |
|
|
Toyota Six Stud High Steer Arms
Trail-Gear is the
originator of forged high steer arms for
Toyota Pickups and 4Runners. Each arm is
pressure forged from 8620 tool steel, these
arms are incredibly strong. Because we make
them in lots of 1,000 at a time we can offer
these at a great low price! All mounting
surfaces are machined including the split
washer surface and the tie rod tapered
holes, ensuring correct and positive contact
between parts, preventing knuckle studs and
tie rod ends from coming loose. Arms are
angle compensated so that the rod ends ride
at the factory designed 90 degree angle.
Fits 1979 - 1985 Toyota pickup and 4Runner.
Also fits 1979 and later Land Cruisers with
spring over conversion. No questions asked,
lifetime warranty.
|
|
High Steer Arms,
6 stud, $199 pair, 130010-1-K |
|
|
 |
Six stud
knuckles designed in conjunction with Marlin
Crawler.
|
|
|
|
|
|
|
|
|
