View your shopping cart.
Rock Assault™ Steering Pump Kit
$440.00
The stock Toyota pump is just barely able to supply the volume and pressure needed to run Hydraulic assist steering. The stock pump puts out 1,300 PSI at only one gallon per minute. The stock pump is not able to provide enough fluid to run both the stock steering and the demands of a ram, especially at low RPM's. Drilling out the restrictor plates in a stock pump for more volume often leads to pump failure.
The answer is a replacement "TC" style pump. The Trail-Gear Rock-Assault™ pumps puts out either 1,450 or 1,650 PSI of pressure at 4 and 4.5 gallons per minute respectively. This provides the full fluid volume your steering box and ram are looking for, even at an idle.
Pump kit includes your choice of 1,450 or 1,650 PSI pump, pump bracket, reservoir, reservoir bracket, belt, fittings, hoses, & hardware. Pump kit is designed to work with stock or ram drilled IFS power steering boxes.
Application Notes: This pump and bracket is designed to fit all Toyota 4cyl 4wd motors from 1979 - 1995. A large power steering fluid cooler (included) is required on the low pressure side of the system. Pump bracket works in conjunction with stock idler bracket. If your truck is not currently equipped with power steering, you will need to purchase the idler bracket and replace the steering gear box with one designed for use with power steering. The stock fan belt will not work with this pump and will need to be replaced with Napa #9430 belt. Belt is included with kit.
Note: You may choose either the OEM bracket or the Trail-Gear tube mount bracket.
Note: Never use ATF fluid, or a semi-synthetic blend. This will void the warranty. Ok to use standard power steering fluid or a full synthetic. Royal Purple fully synthetic power steering fluid recommended.
Available Options:
- Rock Assault™ 1,450 PSI Pump Kit, 130502-1-K, $440
- Rock Assault™ 1,650 PSI Pump Kit, 130568-1-K, $510
Rock Assault™ Ram Pump, Bracket, and Belt
$23.00
The Trail-Gear Rock-Assault™ pump puts out 1,450 psi of pressure at 4 gallons per minute. This provides the full fluid volume for your steering box and ram are looking for, even at an idle. Works with ram assist or full hydro steering applications. Pump includes pre-installed pulley.
Reservoir bracket makes for easy mounting on 20r and 22r motors. Unpainted finish.
Note: Never use ATF fluid, or a semi-synthetic blend. This will void the warranty. Ok to use standard power steering fluid or a full synthetic. Royal Purple fully synthetic power steering fluid recommended.
Available parts:
- Rock Assault™ Pump, $173, 130500-1-K
- Pump Bracket w/Hardware, $56, 130501-1-K
- V-Belt, $23, 130519-1
Tacoma Rock Assault™ 2.7L Power Steering Kit
$446.00
After you have completed the solid axle swap on your 95-04 2.7L Tacoma, you will need to upgrade your power steering pump so that you can turn those big tires on the trail. The stock pump works well enough for the stock IFS and stock tires, but once you put on larger tires the pump will not be able to put out enough volume to turn them fast enough, especially if you have a ram assist system installed.
Trail-Gear has developed a power steering upgrade kit just for the 2.7L that includes all the brackets, hoses, and hardware that you will need to do the install right the first time. This kit includes an all steel TC style pump that puts out 4 GPM of flow at 1,450 PSI of pressure, so this pump will keep up with the extreme off road trails that solid axle Tacomas are known for frequenting.
This kit is designed to work with an 86-95 Toyota IFS steering box, but an adapter fitting can be added to the end of the high pressure hose that will allow you to use this kit with almost any power steering box on the market.
Tacoma Rock Assault™ Power Steering Kit, 2.7L, 130101-1-K, $446
Tacoma Serpentine Pulley
$39.00
Trail-Gear offers TC style power steering pump pulleys for both serpentine and v-belt style belts. All pulleys are precision CNC machined from 6061 T6 Aluminum and anodized red for a sharp look at will last for years to come. The center hole bore diameter is .660" and the total outside diameter of the pulley is 4 3/4".
This serpentine belt fits 2.7 and 3.4 Tacoma applications and many other common serpentine belt applications that use a 4 rib belt.
Tacoma Serpentine Pulley, 130094-K, $39
Rock Assault™ 3.0L V6 Power Steering Pump Kit
$510.00
We all know that the stock pump on a 3.0 is just not enough to turn big tires or run a ram assist and when you try and drill out the inlet to get more volume the result is a loud pump followed by pump failure. A new Toyota stock pump puts out around 1,300 PSI at only one gallon per minute. Our Rock Assault™ Pumps put out 1,450 and 1,650 PSI at 4-4.5 GPM, which is more than enough volume to provide you with the steering power that you will need to turn big tires or run a ram assist or full hydraulic steering system.
Trail-Gear has hand picked each component in this kit to ensure quality, ease of installation, and durability. This kit ships complete with all parts included and full color installation instructions.
Application Notes: This pump and bracket is designed to fit all Toyota V6 3.0 Pickups and 4Runners from 1989-1995. This kit does not work with 3.0 Tacoma’s. This kit will not work on 4Runners with a functioning AC, because the AC cooling fan must be removed for the placement of the PS Pump cooler.
Never use ATF fluid, or a semi-synthetic blend. This will void the warranty. Ok to use standard power steering fluid or a full synthetic. Royal Purple fully synthetic power steering fluid recommended.
Available Options:
- V6 PS Pump Kit, 1,450 PSI, 130081-1-K, $510
- V6 PS Pump Kit, 1,650 PSI, 130082-1-K, $576
- V6 PS Pump Kit, Non-ABS, 1,450PSI, 130331-1-K, $510
- V6 PS Pump Kit, Non-ABS, 1,650PSI, 130332-1-K, $576
