PDA

View Full Version : FSM ?? HELP !!


norzuki
02-27-2007, 04:56 PM
Hey Guys,

I am in the middle of putting my new motor in my runner and I was wondering if anybody had a FSM for a 1984 runner with the 22R motor?

I know I should have taken pics, but I had to do the removal pretty quick :(

Now I have questions concerning vacuum lines and 2 or 3 pipes on the motor.

If someone is willing to take pics to help me out ... heck that would be great to :thumbs:

my next post will be pics with explanations

Loki
02-27-2007, 11:32 PM
i have the 85 FSM for a 22re, my budy has an 84 22r it wouldn't be hard to get this information to you. i took pictures of mine before i started i even used a sharpie and marked them as a backup

A-D-D
02-27-2007, 11:51 PM
Hey man, this is all that I could find to help out on quick notice....and I don't have a FSM for that year/model. Loki will probably prove more helpful but check out the links below. And I know this isn't the PBB but a FSM would be a wise investment - I scored an almost new one for ~$45.00 on Ebay. Of course, we will always help if you need it.

OlBlueCJ7 posted some Vac line info in the PBB Toyota FAQ last year. Didn't see '84' but it should refresh your memory.
PBB Toyota FAQ - Vacuum Lines (Post #156) (http://www.pirate4x4.com/forum/showpost.php?p=5199570&postcount=156)

This one is cool too.
http://www.autoshop101.com/autoshop15.html


:popcorn: Good luck with your rig NorZuki - Now I wanna check out your build, post some pics. :popcorn:

norzuki
02-28-2007, 03:23 AM
right now this is what I have questions about.

Pic #1 - 2 pipes in the pic I am thinking that these pipes go to the same
location ..... ie: small port mounts directly to head this pipe
bolts under the port. The 2 pipes are different though .... one on the
right goes around the back of the head and turns up right at the #4
sparkplug this pipe was with my old motor

one on the left goes toward the back and goes toward the
passenger side and up.this pipe came with new motor.

I am thinking this pipe is a water pipe of sorts

Pic #2 - This port is about 3/8" in size and is located at the rear passenger
side corner of the carb......... what connects to this?

Pic #3 - where dose the bracket go and the bolt with the small tab?


http://www.zuwharrie.com/gallery/albums/userpics/10108/two_pipes.jpg

http://www.zuwharrie.com/gallery/albums/userpics/10108/carb_port.jpg

norzuki
02-28-2007, 03:24 AM
pic #3



http://www.zuwharrie.com/gallery/albums/userpics/10108/2_brackets.jpg