New Product, Upper Rear Axle Link Bracket

[Chris Geiger]

http://www.trail-gear.com/images/08-0067-600.jpg

We can also set up your rear Rock Assault axle housing with an upper link mount kit. The upper link mount bracket can be purchased for $99. This bracket is designed to accommodate 1.25" Johnny Joints. The upper link mount kit can be ordered loose as a do-it your-self install, or it can be ordered installed onto a housing if you are ordering a housing at the same time. Installed cost $149.

http://www.trail-gear.com/images/john-flex-600.jpg

More Info...

http://www.trail-gear.com/axlehousing.html

[UKMyers]

Schweet!

[94banshee]

does this only fit your housing or will it also work on a stock housing?

[Chris Geiger]

This one will only fit our housing.

I think we will be doing one for stock housings when we start selling the rear 4 link kit with have been working on.

[RCECV711]

The rear suspension is under going some changes. The 3 link is has been removed and the solid upper link is being replaced with two separate links. So the rear will end up being a 4 link setup. The 3 link was working well, but is very difficult to assemble. Ultimately it looks as if the 4 link is going to cost about the same but you end up with a system that is much easily to install and service. Basically you slap this bracket on the top of the axle and weld it up, then the links can be bolted in place.

http://www.trail-gear.com/bbs/zukitoy/22.jpg

http://www.trail-gear.com/bbs/zukitoy/23.jpg

http://www.trail-gear.com/bbs/zukitoy/24.jpg

chris do you know when these will be out? and will you be able to get them with out the four link bracket on top

:thanks:

[Chris Geiger]

I do not know when ANYTHING will be out. As soon as new products become available I post it here and on our web site.

[b4wheeler]

Do the lower links on the four link mount up just like on the three link?????

Is it worth purchasing the three link now, or should I wait for the four link to become available.

I really want to get the rear of my truck linked in the next couple of months..

[Chris Geiger]

The 3 link it totally different from the 4 link. Each of the 4 links ties into this crossmember. This crossmember will be included with the 4 link setup.

http://www.trail-gear.com/bbs/2007-1938.jpg

[TwistedMetal]

Thats bad ass!!! :thumbs:

Nice work ! :flame:

[b4wheeler]

Is there an estimated time of availability for the four link ?

[Chris Dunbar]

Is there an estimated time of availability for the four link ?

We expect less than 3 months.

[b4wheeler]

what are the chances that some of the three link kit will work w/the 4-link kit???
i am thinking maybe the links will be the same length....

[Chris Geiger]

what are the chances that some of the three link kit will work w/the 4-link kit???
i am thinking maybe the links will be the same length....

The lower links will be similar in length and the rod ends will be the same but everything else is different.