12" Long Spline Drive Shaft Kit

[Rogern]

Im building a zuki samurai with k-links (3with panhard), the axles will be about the same place like the zuki crawler Chris build. i was wondering is the 12inch long enough,since with links i dont get the same axle movement i do with leaf springs.:confused:

[Chris Dunbar]

With links you should get very little axle movement forward and backward.
so, yes the 12" slip will be enough.

[Chris Geiger]

I used less than 2" of spline travel on my setup. 12" will be plenty of stroke.

[Rogern]

thanks Chris :thumbs: more stuff in the candy bag.

oh btw:

Driveline Kit, Long Travel, w/Matsuba Joint, $179, 100005-1-K
are with the non CV joint

Driveline Kit, Long Travel, w/Creeper Joint, $199, 100007-1-K
is the one with CV joint right?
not easy knowing all the words in english :D

[Chris Geiger]

We sell only the slip spline, U-joint and flange. We don't offer complete shafts or CV's. The Creeper joint is a stronger version of the stock U-joint. You will still need parts from a stock drive shaft as well as tubing to create a finished part.

http://www.trail-gear.com/images/tg2006-5529.jpg

This photo shown on the web site, shown above, is a finished shaft I made using the TG slip spline. This is what a finished shaft looks like but is not what we are selling. That shaft has a stock CV on it.

http://www.trail-gear.com/images/driveshaftkit-600.jpg

This is a photo of what is included in the drive shaft kit. In order to complete your driveshaft you will need a second ujoint or CV, flange and driveshaft tubing.

[Rogern]

ok cool, just need to get my hands on some stock driveshafts then and do some welding magic :thumbs: