Help with my lift for Cherokee

[Vaterland]

I baught a used lift from a guy for a couple bucks off of his 1989 cherokee and its missing certain parts what do i need to lift it.this will be my first lift project im 100% clueless.the guy gave me these coils

http://i140.photobucket.com/albums/r9/mike92589/100_3491.jpg

and he gave me these 2 things. and i think he said he bent one to fit or something im not sure.
http://i140.photobucket.com/albums/r9/mike92589/100_3490.jpg
these blocks wich i have already put in the back but now my shocks dont fit and my brakes dont reach.

http://i140.photobucket.com/albums/r9/mike92589/100_3489.jpg
so thats all i got its a 1985 wagoneer but it looks exactly like the cherokee v6 comandtrac 4door.

all i have is the blocks(already installed)
the coils
and 2 other things what else do i need to fit?thnks

[jackrista]

get extended brake lines and go to a good part store and get shocks that measure 2-4 inches longer than factory, the item next to the drive line is a track bar, if it looks just like the one on your truck, then you will need a differt mounting bracket that you can get from 4wp's pro crap sells it seprately

[xj4life2]

First of all those are a 4" lifted coil . The track bar has been cut off the axle I suggest you trash it and get an adjustable one. You will need sway bar extensions or sway bar quick disconnects for the front. extended brake lines front and rear. Rear sway bar goes in the used steel pile. the shock question has already been answered. Posably a drop pitman arm (your call, can cause bump steer either way). Thats about all I can think of other than check your diveline angles and length. Good Luck !!!!