PDA

View Full Version : New Product - V6 Adapter Plate

Chris Geiger
10-20-2008, 05:59 PM
http://www.trail-gear.com/images/100086-1-k.jpg
http://www.trail-gear.com/bbs/2008-2172-600.jpg

3.0L V6 Adapter Plate

This adapter plate allows one or more gear driven transfer case(s) to be bolted up to 1988-1995 Toyota 3.0L V6 5 speed transmissions. Our updated design does not require modification to the transmission for installation thanks to the use of countersunk mounting hardware. Another exclusive feature is the use of all nine transmission mounting bolts on both single and dual case installations.

With our V6 adapter plate you can install the legendary Toyota gear driven transfer case(s) in your trail rig. These cases are known for their strength, reliability and configuration flexibility. With the correct adapter plate you can put one, two or even three transfer cases into your truck. Each case can have stock 2.28 gears or 4.70 low range gears installed.

The best part is the price. For just $299 you get the best V6 Adapter on the market.

Complete product instructions are here...
http://www.trail-gear.com/pdf/100086-1-k.pdf
bruzer
10-20-2008, 08:43 PM
Well its about time. Jeez. j/k
MSR
10-21-2008, 10:42 AM
I assume you use a 23 spline t case?
Chris Dunbar
10-21-2008, 12:05 PM
I assume you use a 23 spline t case?

Yes.

We sell the 23 spline 4.70 and 2.28 input gears so you don't have to buy a 23 spline t-case. You can just buy whatever t-case and then buy the appropriate input gear from TG.
j81hatala
10-22-2008, 02:11 AM
Are you in the process of making one for the 3.4L because that is my next upgrade is motor and trans.

Jeff
Chris Dunbar
10-22-2008, 09:00 AM
Are you in the process of making one for the 3.4L because that is my next upgrade is motor and trans.

Jeff

Not at this time but maybe in the future.
TOYJOETA
10-23-2008, 05:22 PM
Are you in the process of making one for the 3.4L because that is my next upgrade is motor and trans.

Jeff

X2 I need one to go behind my new A340F.
MaXXis85
10-24-2008, 05:57 AM
My truck is needing evrything on the picture all the way at the bottom. dual cases, adapter, v6, adapter, twin stick, x member, and t case mounts.
KD671
10-26-2008, 08:05 PM
My truck is needing evrything on the picture all the way at the bottom. dual cases, adapter, v6, adapter, twin stick, x member, and t case mounts.


x2 need the whole setup, currently doing a build and so far only got the front axle hung (FJ80 front axle :cool: Hi-pinion) been waiting for this adapter in the meantime searching for two topshift Tcases and still no luck.

But that set up looks real PIMP